RIGID MONOCRYSTALLINE MODULES / OEM & ODM
SGM Series
Rigid Solar Panels.
Framed, glass-front monocrystalline modules for U.S. RV brands, off-grid system suppliers, distributors and project integrators. SGM2-N TOPCon configurations combine defined electrical specifications, mounting options and long-term outdoor project planning.
SUNGOLD / SGM SERIES
PRODUCT ENGINEERING
Built for a fixed fit.
Designed for the outdoors.
igid solar modules are specified around more than nominal wattage. Frame dimensions, mounting points, environmental loads and cell technology must work together with the receiving system.
TEMPERED GLASS / RIGID ALUMINUM FRAME
Engineered for.
real mounting conditions.
SGM uses framed monocrystalline module construction for defined, mechanically supported installations. Review frame geometry, support spans, fastener positions and site-specific loading before integrating the panel into a finished product or array.
CELL PLATFORM
N-type TOPCon selection
The published SGM2-N matrix lists 182 mm-format TOPCon cells. Back-contact cell options are described separately and require project-specific confirmation.
SNOW-LOAD REFERENCE
5400 Pa
Published mechanical-load figure. Confirm its applicable model, test standard, mounting points and support arrangement before specifying a project.
WIND-LOAD REFERENCE
2400 Pa
Published mechanical-load figure, not a blanket installation guarantee. Real-world performance depends on racking, fasteners and site engineering.
APPLICATIONS & INTEGRATION
Built around real use.
Made for fixed installation.
SGM is a practical starting point where a structural frame, tempered glass and defined mounting geometry are preferred. The right model depends on available area, weight allowance, equipment voltage and applicable codes.
RV & Trailer Systems
For suitable rigid-mount roof structures, match module footprint, mounting brackets, roof equipment clearance and the vehicle's charge controller limits. Verify vehicle load and fastening requirements.
Custom Fixed Arrays
Support rooftop, ground-frame and specialized installations with a defined module size, electrical layout and documentation package for design review and procurement.
Cabin & Remote Systems
Consider SGM for cabins, remote equipment and telecom-related PV systems when the racking, controller, storage and required days of autonomy have been engineered as a complete system.
Specifications for OEM selection.
Compare the published SGM2-N TOPCon models by panel footprint, mass and electrical parameters. Confirm an issued datasheet and model-specific approval documents before release.
| Model | Pmax | Dimensions (mm) | Weight | Voc | Vmp | Isc | Imp | Cell efficiency* | Cell layout |
|---|---|---|---|---|---|---|---|---|---|
| SGM2-N-100W | 100 W | 805 × 580 × 30 | 4.5 kg | 34.5 V | 30.5 V | 3.44 A | 3.28 A | 25.0% | 3 × 16 |
| SGM2-N-160W | 160 W | 980 × 765 × 35 | 6.8 kg | 28.7 V | 25.4 V | 6.61 A | 6.30 A | 25.0% | 4 × 10 |
| SGM2-N-210W | 210 W | 1260 × 765 × 35 | 8.7 kg | 36.9 V | 32.5 V | 6.78 A | 6.46 A | 24.5% | 4 × 13 |
| SGM2-N-240W | 240 W | 1450 × 765 × 35 | 10.0 kg | 43.0 V | 38.1 V | 6.61 A | 6.33 A | 25.0% | 4 × 15 |
| SGM2-N-390W | 390 W | 1555 × 1134 × 30 | 16.0 kg | 34.4 V | 30.5 V | 13.43 A | 12.79 A | 25.0% | 6 × 8 × 2 |
| SGM2-N-435W | 435 W | 1740 × 1134 × 30 | 17.9 kg | 38.7 V | 34.3 V | 13.32 A | 12.69 A | 25.0% | 6 × 9 × 2 |
| SGM2-N-485W | 485 W | 1925 × 1134 × 30 | 19.8 kg | 43.0 V | 38.1 V | 13.37 A | 12.73 A | 25.0% | 6 × 10 × 2 |
| SGM2-N-535W | 535 W | 2115 × 1134 × 30 | 21.8 kg | 47.3 V | 41.9 V | 13.41 A | 12.77 A | 25.0% | 6 × 11 × 2 |
| SGM2-N-585W | 585 W | 2300 × 1134 × 30 | 23.7 kg | 51.6 V | 45.7 V | 13.44 A | 12.81 A | 25.0% | 6 × 12 × 2 |
← SWIPE HORIZONTALLY TO VIEW ALL SPECIFICATIONS →
*Cell efficiency is a solar-cell value, not finished-module conversion efficiency. The table reproduces the published SGM2-N model matrix; availability, frame finish, cell bin, junction box, connectors and production configuration must be confirmed on the issued datasheet. Dimensions are L × W × thickness.
*Published global-site ratings and warranty descriptions. The 1000 V DC figure is not U.S. installation approval; confirm applicable UL/CSA documentation, model identification and rated system voltage. Warranty coverage and performance terms are subject to the issued documents. The product overview states a −0.29%/°C power temperature coefficient, while the SGM2 specifications table states −0.32%/°C; the released model datasheet must govern the final value. IP67/IP68 wording on the global page also requires checking component/test scope before use in U.S. marketing.
OEM & ODM CAPABILITIES
A defined module.
Built around your project.
For distributors, equipment makers and integration partners, Sungold can review frame size, nominal output, electrical layout, mounting holes, cable exit, connectors, brand labeling and packaging. Final dimensions, testing and documentation must be approved through engineering review and samples.
MECHANICAL DESIGN
Dimensions & Mounting
ELECTRICAL MATCH
Power & Voltage
CONNECTIONS
Lead Exit & Connectors
PRIVATE LABEL
Branding & Packaging
Before you specify.
Practical guidance for U.S. RV brands, off-grid system suppliers, EPCs and sourcing teams reviewing SGM rigid solar modules.
What is the SGM Series designed for?
SGM is Sungold's framed, glass-front monocrystalline module family for applications that can accommodate a rigid panel and engineered mounting structure. Typical project discussions include RV OEM integration, rooftop and fixed-frame systems, distributors, remote-power equipment and non-standard off-grid projects.
Which SGM2-N models are included in the published range?
The current published TOPCon matrix lists nine models rated at 100, 160, 210, 240, 390, 435, 485, 535 and 585 W. Physical dimensions, weight and electrical ratings vary by model. Buyers should request the exact current datasheet for the configuration being quoted.
How should I interpret the 5400 Pa snow-load and 2400 Pa wind-load values?
These are published mechanical-load references, not a guarantee for every model, bracket or site. Confirm the applicable test reports, support points, mounting method, local design loads and installation requirements before use.
Does the SGM Series have U.S. certification?
Sungold lists IEC 61215/61730 testing and SGM certificate resources on its global website. For a North American order, request the exact model number, certificate/listing documents, applicable standard, authorized label and approved installation scope. Do not assume all SGM variants carry identical U.S. certification.
Can SGM panels be specified for a marine or coastal project?
A marine or coastal design requires documented salt-mist/corrosion performance, appropriate fasteners, protected connectors and installation review. An IP rating alone does not establish salt-spray suitability. Request model-specific evidence before describing an SGM configuration as marine-ready.
What is the SGM warranty period?
The current global SGM page describes a 10-year product warranty and 25-year power warranty. The detailed coverage, power-retention schedule and exclusions should be confirmed against the issued warranty for the exact ordered model.
Can Sungold provide custom dimensions or private-label modules?
OEM/ODM projects can be evaluated for dimensions, cell layout, voltage, hole patterns, cable routing, connector choices, labels and packaging. Feasibility, approvals, testing scope and minimum order quantities depend on the final specification.
What information should be sent with an OEM inquiry?
Share the target wattage, roof or structure drawing, maximum panel dimensions, mounting layout, controller or inverter voltage/current window, cable and connector specifications, target market, certification requirements, estimated volume and project timeline.
OEM / ODM PROJECT INQUIRY
Let's specify the right rigid module.
Share your project drawing, target wattage, mounting constraints and expected purchasing volume. Sungold's team can review feasible rigid-module configurations and document requirements.
FOR BUSINESS CUSTOMERS
RV and equipment manufacturers, solar distributors, system integrators, EPC teams and off-grid solution brands.
For model-specific certificates, mounting drawings or custom module studies, include the destination market and intended installation.