DOUBLE-GLASS BIFACIAL MODULES / OEM & ODM
DG Series
Bifacial Solar Panels.
Double-glass monocrystalline solar modules designed to generate power from both sides. For U.S. solar distributors, system integrators, building-product manufacturers and OEM partners developing fixed solar installations where reflected light can add energy yield.
SUNGOLD / DG SERIES
PRODUCT ENGINEERING
More light to work with.
Protection on both sides.
DG Series combines bifacial energy generation with double-glass module construction. Performance depends on the complete installation, including rear-side clearance, surface reflectivity, mounting geometry and environmental conditions.
DOUBLE GLASS / BIFACIAL PHOTOVOLTAICS
Capture the front.
Use the reflected light behind.
DG modules capture direct sunlight through the front and additional irradiance through the rear. The double-glass structure protects the photovoltaic laminate on both faces. Extra yield is possible when sufficient reflected light reaches the back of the module.
ENERGY GENERATION
Two active sides
Rear-side production can add energy beyond front-side output, depending on albedo, tilt, height, clearance and shading.
MODULE CONSTRUCTION
Dual-glass protection
Glass on both faces forms a protective laminate structure. Moisture resistance and long-term durability should be checked against the actual test scope.
CELL PROCESS
Multi-cut cell design
The published DG construction uses multi-cut monocrystalline cells. The design aims to reduce localized current-related heating and supports the module's electrical architecture.
BIFACIAL DESIGN FACTORS
The rear side matters.
So does the installation.
Bifacial panels do not generate the same rear-side energy in every location. Site layout determines how much reflected and diffuse irradiance can reach the rear glass.
01 / SURFACE
Albedo
Reflectivity matters
Light-colored surfaces and reflective ground can increase the irradiance reaching the back of the module. Dark surfaces generally offer less reflected-light potential.
02 / MOUNTING
Clearance
Keep the rear exposed
Panel elevation, racking structure and unobstructed rear space influence the amount of usable reflected light. A panel mounted directly against an opaque surface offers limited rear gain.
03 / LAYOUT
Orientation
Plan the full array
Tilt, row spacing, surrounding objects and nearby structures affect front- and rear-side irradiance. Vertical systems require their own orientation and shading assessment.
* Bifacial gain describes additional generation under specified installation conditions. The published DG page describes potential rear-side energy gains of 5%–25% under suitable conditions. These are not guaranteed output improvements for every installation.
APPLICATIONS & INTEGRATION
Built around real use.
Designed for integration.
DG modules can be evaluated for fixed structures that allow usable light to reach both sides. Architectural integration, wind loading, mounting geometry and applicable codes should be assessed for each project.
Solar Canopies & Sunrooms
Evaluate bifacial modules for engineered overhead structures where both surfaces remain exposed to light. Confirm structural, electrical, fire and overhead-glazing requirements before integration.
Vertical Solar Structures
Consider DG for solar fences, privacy barriers and other vertical structures. Evaluate orientation, wind loading, frame support, shading and access to both sides before specification.
Commercial & Special Projects
Explore selected DG configurations for building-adjacent structures, acoustic barriers and specialized fixed arrays, subject to module-specific approvals, environmental loads and system design requirements.
Specifications for OEM selection.
Compare the published SG-DG configurations by module size, weight and electrical ratings. Final project specifications should be based on an issued datasheet for the exact model.
| Model | Pmax | Dimensions (mm) | Weight | Voc | Vmp | Isc | Imp | Cell efficiency* | Cell layout |
|---|---|---|---|---|---|---|---|---|---|
| SG-DG-200W | 200 W | 1260 × 770 × 30 | 12.76 kg | 31.4 V | 27.3 V | 7.48 A | 7.33 A | 25.0% | 4 × 11 × 2 |
| SG-DG-250W | 250 W | 1595 × 770 × 30 | 16.15 kg | 34.4 V | 30.5 V | 8.61 A | 8.20 A | 25.0% | 4 × 12 × 2 |
| SG-DG-300W | 300 W | 1930 × 770 × 30 | 19.55 kg | 28.7 V | 25.4 V | 12.40 A | 11.81 A | 25.0% | 4 × 12 × 2 |
| SG-DG-430W | 430 W | 1750 × 1134 × 30 | 26.11 kg | 38.8 V | 34.3 V | 13.17 A | 12.54 A | 25.0% | 4 × 9 × 2 |
| SG-DG-580W | 580 W | 2300 × 1134 × 30 | 34.32 kg | 51.7 V | 45.7 V | 13.32 A | 12.69 A | 25.0% | 6 × 12 × 2 |
← SWIPE HORIZONTALLY TO VIEW ALL SPECIFICATIONS →
Published specifications are nominal values from the global SG-DG product page. *Cell efficiency refers to the solar-cell rating, not finished-module conversion efficiency. Dimensions are length × width × thickness. Confirm issued datasheets, electrical tolerances, test conditions and model availability before ordering.
Published component information: PV-XT1609Nxyz split-type junction box, XT3050M-B diode configuration, 300 mm / 4 mm² PV cable and MC4 interface. Confirm these details for the ordered variant. *The maximum system voltage is a published design rating, not proof of approval for U.S. installations. Warranty coverage, performance guarantees and exclusions depend on the issued terms and market.
OEM & ODM CAPABILITIES
From module design
to project integration.
Sungold supports solar distributors, building-product companies, system integrators and OEM partners with project-specific DG module evaluation. Customization can include panel dimensions, electrical specifications, cell layouts, junction-box configuration, cable lengths, connectors, branding and packaging, subject to engineering and certification review.
MECHANICAL DESIGN
Module Dimensions & Mounting
ELECTRICAL
Power & Voltage
CONNECTIONS
Cable & Junction Box
BRAND PROGRAM
Labeling & Packaging
Before you specify.
Practical answers for U.S. solar distributors, system integrators, building-product manufacturers and procurement teams evaluating double-glass bifacial solar modules.
What is the main advantage of DG bifacial solar panels?
DG Series modules generate electricity from front-side sunlight and additional irradiance reaching the rear surface. This can increase total energy yield compared with a comparable monofacial installation under suitable conditions. Actual gains depend on reflectivity, mounting height, orientation and shading.
How much additional energy can the rear side generate?
The global DG page describes potential additional energy gains of 5% to 25% under suitable conditions. This is not a guaranteed gain for every site. The actual result should be estimated using the project layout, ground albedo, rear-side irradiance and operating conditions.
How does double-glass construction differ from a traditional solar panel?
A conventional glass-backsheet module has front glass and a polymer backsheet. DG uses glass on both sides of the photovoltaic laminate, providing a protective rear surface that also allows suitable cells to receive reflected light. Weight, mounting and handling requirements must be reviewed for each model.
Which installations are suitable for bifacial modules?
Potential applications include elevated fixed arrays, solar canopies, selected building-adjacent structures and vertical solar fencing. Installations should allow useful rear-side irradiance while meeting structural, electrical, safety and local permitting requirements.
What are the published DG mechanical load ratings?
Sungold's global product page describes 5400 Pa front-side snow loading and 2400 Pa rear-side wind loading. These published values must be checked against the selected model's test documentation, mounting method, support spacing and local design loads.
Are DG modules certified for U.S. installations?
The global page references CE and RoHS documentation and other testing. These do not by themselves establish U.S. installation approval. Request the exact model's applicable North American certification or listing, installation documentation and approved use conditions before specifying it for a U.S. project.
What warranty coverage is available for DG modules?
The current global DG page lists a 12-year product warranty and describes a 25-year linear power output warranty in its FAQ. Warranty terms for a North American order should be confirmed in writing, including eligible models, exclusions and the applicable power-retention schedule.
What should be included in an OEM or private-label inquiry?
Share the target model or wattage, required module dimensions, mounting structure, desired rear-side exposure, electrical input limits, connector requirements, target market, certification needs and estimated order volume. Sungold can evaluate feasibility and sample requirements.
OEM / ODM PROJECT INQUIRY
Built for your next solar product.
Tell us what you are developing. Share your intended application, installation layout, target wattage, certification requirements and expected purchasing volume with Sungold's manufacturing team.
FOR BUSINESS CUSTOMERS
Solar distributors, building-product manufacturers, EPC teams, system integrators and custom PV brands.
Useful details include module dimensions, reflective surface conditions, mounting structure, required electrical parameters, destination market and projected order quantity.